BJMPZ - 00731 MILITARY SYMBOL 2075 T-H

  • MSDS: BJMPZ
  • Manufacturer: TEXACO
  • Product Name: 00731 MILITARY SYMBOL 2075 T-H
  • National Stock Number: 9150-00N011498
Product Identification

Product ID:00731 MILITARY SYMBOL 2075 T-H
MSDS Date:06/21/1989
FSC:9150
NIIN:00N011498
MSDS Number: BJMPZ

Responsible Party
TEXACO
BEACON, NY 12508
US

Emergency Phone: 914-831-3400 EXT 204

Info Phone: 914-831-3400 EXT 204

Preparer: M J VON ALLMEN

Cage: 06668

Contractor
TEXAS INSTRUMENTS INC INFORMATION TECHNOLOGY GROUP
1444 HOUSTON, TX 77251 US

Telephone: 800-336-5236

Cage: 06668

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 95-99.9%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

Hazards

LD50 LC50 Mixture:LD50:(ORAL)>10 G/KG(RAT)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) EYES/SKIN: BELIEVED TO BE
MINIMALLY IRRITATING. INHAL: VAPORS OR MIST IN EXCESS OF
PERMISSIBLE CONCENTRATIONS MAY CAUSE IRRITATION (NOSE/THROAT),
HEADACHE, NAUSEA, AND DROWSINESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE ABOVE
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH PLENTY OF WATER AT LEAST 15 MIN. SKIN: WASH
EXPOSED AREAS WITH SOAP AND WATER. INHAL: IF IRRITATION OR
DROWSINESS OCCURS, REMOVE TO FRESH AIR. INGEST: GET MD IMMEDIATELY
.

Fire Fighting

Flash Point Method:COC
Flash Point:390F,199C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM, OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER OR FOAM MAY CAUSE FROTHING. USE WATER TO COOL
FIRE-EXPOSED CONTAINERS. (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:CONTAIN SPILL IF POSSIBLE. WIPE UP OR ABSORB
ON SUITABLE MATERIAL AND SHOVEL UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:MAINTAIN FEASIBLE HNDLG TEMPS.
MINIMIZE EXPOSURE TO HIGH TEMPS. AVOID WATER CONTAM.
Other Precautions:NONE CONSIDERED NECESSARY

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:ADEQUATE TO MEET COMPONENT PERMISSIBLE CONCENTRATIONS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEM WORK GOGGLES, FACESHIELD OPT
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:CLEANSE EXPOSED SKIN AREAS SEVERAL TIMES DAILY
W/ SOAP & WATER. LAUNDER/DRY CLEAN SOILED WORK CLOTHING AT LEAST
WEEKLY.
Supplemental Safety and Health
FIRE FIGHT PROC: IF LEAK OR SPILL HAS NOT IGNITED, USE WATER SPRAY TO
DISPERSE VAPORS & PROVIDE PERSONNEL PROTECTION.

Chemical Properties

Spec Gravity:0.8644
Appearance and Odor:CLEAR, PALE LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
ALDEHYDES AND KETONES MAY BE FORMED.
Conditions to Avoid Polymerization:STRONG OXIDIZERS

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.